|Dimensions||27 × 25 × 3 in|
Made from durable Model Airplane Foam. This F-22 Raptor kit does great flying high alpha passes. Light enough to punch out and climb away. This is one of my favorites.
Any Brushless motor can be used. The RXR comes with a CF 2812 1534KV Brushless Outrunner motor, 20 Amp ESC and a 1300mAh 3 cell Li-Poly pack with a 7 x 6 prop.
Out of stock
Glue the fuselage double on top and bottom Fuselages. Glue the top and bottom fuselages to the wing. Glue the firewall to the back. Push the Fins thought the wing and then glue in place. Make sure to use Foam safe glue.
Mount engine on the firewall and begin dry placing radio gear into place. We need to balance the plane at 2” to 2-1/2” in front of motor mount.
The Speed Control and Receiver should be placed on the opposite side of the fuselage. Use double sided mounting tape and then zip tie the servos into place.
The model flies with little up trim for level flight. Adjust surface deflection for 3/8” travel in both directions. Increase or decrease surface throw after first flight.
You can combine more then one kit in a box. Any questions, please e-mail email@example.com